Jeep Wrangler Bluetooth Not Working (Full Solution Guide)
The Jeep Wrangler is one of the super off-road vehicles famously known for its ruggedness, capability, and exceptional.
It’s a compact/midsize SUV which was produced by Jeep, a brand owned by Stellantis, formerly known as Fiat Chrysler Automobiles. It has its body on it frame and is available in two-door and four-door configurations.
It has also a removable doors and roof to enhance an open-air driving experience and it is designed for excellent off-road performance with features like four-wheel drive, high ground clearance, skid plates, and available off-road tires and locking differentials.
It has an upright, boxy design that resembles the original Jeep models from World War II.
The latest generation of Wrangler (JL) was launched in 2018 as a 2019 model year vehicle.
In this article we aim at providing full guide on how to resolve bluetooth issues on Jeep Wrangler but before that, let us quickly examine key specifications of the 2023 Jeep Wrangler.
Key specifications of the 2023 Jeep Wrangler
Dimensions
Its Wheelbase is 96.8 inches for 2-door and 118.4 inches for 4-door Unlimited.
Its Length is 166.8 inches for 2-door and 188.4 inches for 4-door Unlimited.
It has a Width of 73.8 inches and a height of 73.6 inches with a grand clearance of 9.7 inches
Engines
It has 3.6L Pentastar V6 (285 hp, 260 lb-ft torque).
For Turbocharged I4 is 2.0L (270 hp, 295 lb-ft torque).
3.0L EcoDiesel V6 (260 hp, 442 lb-ft torque).
4xe Plug-in Hybrid (375 hp, 470 lb-ft torque).
Transmissions
It has the ability to transmit 6-speed for manual and 8-speed for automatic
Drivetrain
Part-time 4WD system (Command-Trac)
Full-time 4WD system (Rock-Trac or Selec-Trac)
Towing Capacity
Its towing capacity is up to 3,500 lbs i.e with 4-door and max towing package.
Fuel Economy (city/hwy mpg)
For 3.6L V6, Up to 19/24
For 2.0L Turbo I4, Up to 22/24
For 3.0L Diesel, Up to 22/29
For 4xe Hybrid, 49 MPGe
Jeep Wrangler Bluetooth Not Working?, below are full solution guides
1. First, restart the Bluetooth system by turning off the Bluetooth feature from the infotainment system settings, after it is completely turned off, wait for about a minute or two, then turn it back on this process can help re-establish the connection.
2. Ensure you delete all previous pairings. To do this, simply go to the Bluetooth settings menu and delete any previously paired devices. Then start afresh to re-pair your phone or audio device.
3. Wrangler’s Uconnect cannot not function with an incompatible device, as such you much ensure your phone or device is compatible by checking the owner’s manual or Jeep’s website.
4. Check for any available over-the-air software updates for your smartphone, and also for your Uconnect system download on both devices and update as outdated software can sometimes cause Bluetooth connectivity issues.
5. Check for software updates: See if there are any over-the-air software updates available for your Uconnect system that may address Bluetooth bugs.
6. Use a clean cloth to wipe off any debris from the Bluetooth antenna/receiver area near the rearview mirror.
5. Reset system.
How to reset jeeb wrangler Uconnect device
1. Turn off the vehicle completely, and ensure you remove the key from the ignition.
2. Find the battery under the hood and disconnect the negative (-) battery cable terminal from the battery.
3. Allow the vehicle to stay for 30-60 seconds with the negative cable disconnected to allow any residual power to drain from the Uconnect system.
4. Put back the negative battery terminal tightly back onto the battery post.
5. Enter the vehicle and insert the key into the ignition (or push the engine start/stop button for keyless) but don’t start the engine yet.
6. The Uconnect touchscreen should power up and you may see a loading screen or Jeep logo as it reboots.
7. Patiently wait for about 1-2 minutes as the Uconnect system fully resets itself during this reboot process.
8. Once reboot is completed, setup screens and reconnect devices like your phone via Bluetooth.
Ensure you reconnect the negative battery cable securely when finished to avoid any warning lights or issues.
If none of these steps resolve the bluetooth issue of your Jeep Wrangler, then your Ucoonect has a hardware issues, as such you may need professional diagnostic assistance from a Jeep dealership’s service department.
